Other

- 10-speed: stainless steel 6.1mm wide no tool chain connector for Shimano and Campagnolo - 9-speed: stainless steel 6.5mm wide no tool chain connector for Wippermann chains - 6-8 speed: stainless steel 6.8mm wide no tool chain connector for Wippermann chains

BB30 service kit includes 2 Enduro 6806 ABEC-3 sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems - Enduro ABEC-3 bearings

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x8 Flat Head Screws

Wheels Manufacturing Dropout Savers are designed to replace damaged threads in rear derailleur mounts. Made from aircraft quality steel, dropout savers provide an economical and reliable alternative to the "major surgery" of replacing a complete dropout. - Wide Dropout Saver (DS-1) fits dropouts thicker than 7mm - Narrow Dropout Saver (DS-2) fits dropouts 7mm or less in thickness - 2 pieces per bag

- Deluxe armrests compatible with all vision tech aero bars - Includes dual density foam armrest pads for maximum comfort - Non-Slip textured top

• Quick-release seatpost clamp • Aluminum lever and cap with a 6mm chromoly bolt

• Shim available in various sizes • For use with 25.4mm or 27.2mm seatposts

- DT Swiss cartridge bearings - Sold in pairs

- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact

- For MTB levers - 7mm x 1mm - Aluminum construction

• Aluminum • CNC-finished

SRAM BB30/English Bottom Bracket Adaptor allows conventional threaded bottom brackets to be installed in a BB30 frame; 68mm shells only - Install with headset press and green Loctite

Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No

Original equipment rear derailleur pulleys for SRAM rear derailleurs. Fits X01, X01DH, X1, GX 1x11, NX, Force CX1, Force 1, Rival 1, Apex 1 Derailleurs. - Wide-narrow pulley tooth profile holds the chain better - Stainless steel sealed cartridge bearings

Converts CenterLock hubs to accept 6-bolt rotors - Available for standard Quick Release as well as Thru-Axle hubs - Extruded alloy collar with CNC shoulder pins and lock ring - Eliminates the need for rotor bolts

Converts braze-on front derailleurs to clamp-on. Available in multiple clamp diameters.

- Anodized or powder coated finish - Allows for secure clamping - Forged aluminum construction - 34.9mm clamp diameter

Origin-8's Quill Adapter allows you to use modern threadless stems on bicycles with threaded forks that take quill stems (stems with bolts in the center). The Quill Adapter is made of light and durable 7075 aluminum and features a chromoly bolt.

• Converts a cassette hub to a single speed • 8 spacers included in various sizes to adjust chain line • Anodized 6061 aluminum • Fits Shimano/SRAM cassette bodies • Conical spacers for increased cog stiffness • Includes single-speed guide, spacers, as well as 18T & 16T cogs

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

Greenfield's Stabilizer Rear-Mount Kickstand attaches to the rear chainstay of the bicycle so it's perfect for bikes that won't accept regular kickstands like mountain bikes. It comes complete with an extra wide rubber foot for superior stability and won't interfere with pedal action or rear derailleur cables. This is the stand of choice for law enforcement bike patrols throughout the U.S. - Fits tube sizes up to 7/8" in diameter - Certified Non-Corrosive Casting - Snap Action Mechanism - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over)

Dimension Steerer Extender adds 2 to 3-1/4" height to steerer. - Extender clamps to steerer; stem clamps to extender - Adds 2 to 3-1/4-inch height to threadless steerer - Includes top cap and long bolt - 40mm of threadless steerer is required for proper installation - Do not stack steerer extenders; no more than one steerer extender recommended per bike - WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers

- Aluminum cups w/ steel hardware - Converts a non-threaded 68mm American BB shell to use an English-threaded Euro BB - Shell: 68mm - Interface: American - Spindle Type: Euro - Cup Material: Alloy - Weight: 104g

The absoluteBLACK's HOLLOWcage® Oversized Derailleur Pulley Cage for Shimano 9100 / 8000 features a revolutionary mono-plate design to provide quiet and precise shifting. - Designed for use with Shimano Dura Ace 9100 / 9150 / 9170 , and Ultegra 8000 / 8050 - Fits up to a 32T cassette - The Silent Xring Pulley dampens the chain impact on the guide pulley teeth, eliminating the engagement noise -Flexible cage design aligns better with the angle of the chain when using the higher gears of the cassette - HOLLOWcage uses abnormally large, bespoke, full ceramic bearings that make the pulleys incredibly stiff for greater shifting precision - Upper pulley features tall teeth to provide improved shifting precision

absoluteBLACK's Chain Catcher is designed to eliminate the possibility of the chain falling in towards the frame when shifting to the inner chainring on uneven road. Chain Catcher is a simple add-on component which improves the overall function of your drive train and protects your valuable frame from dropped chains. Especially recommended for carbon frames. No matter how well you set up the front derailleur with round or oval rings, there is always a possibility that chain may find its way to drop on the frame when you shift quickly from outer ring to inner one. Especially on rough or gravel roads. Mounting the Chain Catcher in front of the front derailleur will prevent such occurrence from happening because the chain will be guided precisely onto the small ring and will not be able to go any further towards the frame. Our Chain Catcher has a conical tapered head, providing an excellent fit to braze-on mounts that are integrated with frame. However, with older frames you may use a clamp braze-on adapter. In such case please ensure that your adapter has a front face also conical (not flat). Unlike the majority of chain catchers on the market, absoluteBLACK's Chain Catcher can be precisely adjusted to ensure only minimal gap is left to the inner chainring for maximum security. - Mass/Size: 11.6g / one size fits all - Compatibility: All braze-on frames and derailleurs. - Adjustability: 6mm chainline adjustment provided on the slot for precise setup - Material: CNC machined 7075 T6 / M5 stainless steel bolt - Finish: type II anodizing

Zipp Speed Weaponry Cartridge Bearings

Zipp Speed Weaponry Cartridge Bearings - Will not work on Zipp 188 V9 rear hubs

Zipp Speed Weaponry Cartridge Bearings

Precise spacers keep your headset tight, and provide correct bike handling and component life. Lightweight and precisely parallel, Zipp carbon headset spacers are precision ground to keep your fork secure through every twist, turn and bump in the road. 1-1/8-inch diameter in 4, 8, 12, and 30 mm heights.

- Includes 61803 bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - Note: 88 front and 188v9 rear hubs are on all 2014 and newer Zipp 202, 303, 404, 808 - One kit required for: Zipp 88, 30 and 60 front hubs Zipp 188v8 rear hubs Zipp ALL free hub driver bodies - These 61803 bearings are not interchangable with the 77/177 hub 61803 bearings